Traffic Safety Flashing Solar LED Reflective Road Studs Water - Proof IP68
Road Stud-P26.pdf
Solar road studs are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, they are an electronic improvement on the traditional cat's eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes them easily visible at distances of about 900 m under favourable conditions.
Averaging about 100 mm square or 100 mm diameter and about 40 mm thick, units are extremely robust to avoid damage by passing vehicles, and are normally constructed of engineering plastics and polycarbonates. Use of solar road studs reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers. They are also more visible in rain and fog conditions where the old type retroreflectors and road markings are problematic. The solar cells charge batteries or capacitors during sunlit hours, over which period the flashing LEDs are turned off by a photoswitch.
What's LED Solar Road Stud?
1. Easy installed.Needs no external power and paved circuit, can be firmly installed by epoxy resin glue or screws.
2. Energy saving. Low power consumption and solar energy.
3. Excellent warning effect. All LEDs can perform more soundly in active lighting, high brightness.
4. Firm and durable. Use the mold to press the outer covering at a time, which needs no more assembly as to improve the compression resistance.
5. Long working-time. 180 hours for flashing ,40 hours for steady in fog or rainy days after fully charged.
Specification:
|
Product
|
Plastic Solar Road Stud |
| Model Number |
SRS-003 |
|
Color
|
Yellow, Blue, Green and White |
| Material |
Plastic PC shell |
| Size |
100x100x20 mm |
| Weight |
220 g/piece |
| Light intensity |
8000 mcd |
| Working Time |
At least 4 days after battery fully charged |
| Charging Time |
3 hours in sunny day,6 hours in rainy day |
| Life Time |
More than 3 years |
| Application |
Highway
|
Description:
1. Light Source:Φ5 high brightness LED * 8pcs Available colors:yellow,red,white.blue,green
2. Flash styles: flash 90±10 times/min
3. Visible distance:≥1000M(in the dark)
4. Power:Ni-MH 1.2V 1600mAh 0.4W monocrystalline silicon solar cell.
5. Working time:120 hours after full charged.
6. Resist compression: 20 tons.
7. IP Rate:IP68.
8. Material:Plastic PC shell
9. Product Lifespan:3-5 years.
10. Diameter:115 mm.
11. Weight:220 g/piece.
12. Work temperature:-20°C~60°C.
Applications:
1. Highway.
2. Bridge.
3. Construction Site.
Features:
1 Light control design,can work automatically according to the environmental illuminance.
2 Rainproof , it can work normally in the rainy day.
Competitive Advantage:
1. Reasonable Price
2. IP68,Anti-high(low) temperature.
3. Waterproof,Anti-sunburn and Rainproof.
4. Energy Saving and Environmental
Installation of Solar Road Stud
1. Install at two sides of road,make sure sunshine could shoot on solar panel on road stud.
2. Using road stud resin or road stud screw to fix.
Application of Solar Road Stud
1. Highway entrance (ramp), bend larger pavement, toll station entrances and exits.
2. At the school gate, village road, intersection, traffic lights, hotels, parks, underground garage entrance (export).
Plastic Solar Road Stud:
