|Place of Origin:||China|
|Minimum Order Quantity:||5000 Pieces|
|Packaging Details:||Packed in carton firstly,and 100pcs/ctn|
|Delivery Time:||5 working days after received your payment|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||500,000pcs per month|
|Product:||Wired Road Stud||Material:||Aluminum Or Plastic|
|LED Number:||6PCS White And 6PCS Yellow (can Customize)||LED Color:||White And Yellow|
|Power:||＜1W||Work Temperature:||-30°C +70°C|
|Light Intensity:||＞3000 Mcd||Lifespan:||≥100000 Hours|
|Working Voltage:||24V DC(or 220VAC）|
catseye road stud,
cat eyes road reflectors
IP68 High Flashing Reflective LED Aluminium Wire Road Studs for Tunnel 100 * 105 * 19 mm
|Wired Road Stud|
|White and Yellow|
|Material||Aluminum or Plastic|
|Light intensity||＞3000 mcd|
|LED QTY||6PCS white and 6PCS yellow (can customize)|
|Visual Distance||>800 Meters|
|Work Temperature||-30°C +70°C|
|Weight Resistance in Static||>20 Tons|
|Working voltage||24V DC(or 220VAC)|
|Life Time||More than 3 years|
Tunnel wired road studs is also called photoelectric pavement marker,LED road stud and road pavement marker.The mainly function is Pavement sight induced warning.It Is a clear, eye-catching adjustable active flashing light led road signs,Continuously laying a light-emitting lane contour line.
3. Construction Site.
5. Approaches shoulder.
7. Traffic islands
8. underground parking entrance of the tunnel wall.
9. Curb or on the road along the side walls.
10. Freeway (ramp), turn the larger road toll station entrances.
11. The school gate, cell junctions, intersections, traffic lights, hotels, parks, tunnels, curbs, underground garage entrance (exit).
1. When install the road studs,it need Set security facilities and configuring security personnel to ensure the safety of the installation work carried out.
2. Need check the location of the installation required a flat, specifications.
3. Try to choose sunny weather construction to make sure the floor is clean, dry (with fixed spike glue must be clean, dry ground).
4. When the glue is installed: appropriate amount of glue needed to ensure that the bottom was saturated sticky glue, such as glue, there is the need to clean up the spill,
Press the spike at the installation location, ensure correct orientation.
5. Cast aluminum with foot installation: holes deeper than "nail pin" depth 1cm, hole diameter is larger than the "nail pin" diameter 2mm (control between 2-5mm).
6. After installation is complete, once inspections to ensure proper installation position of the spike, there is no anti-loaded, installed crooked.
7. After curing spike more than 4 hours, evacuate install security isolation facilities.
1. Working voltage: 24VDC or 220VAC
2. Using high brightness LED light source, double-sided light, luminous uniform, soft light, no glare, good stability. Our new plate imported from Taiwan LED chip, more than ten years has been very focused traffic stable.
3. Constant product installation, interference chips, LED use of more stable and longer life, the light fades smaller life> 3 years.
4. Equipped with spike protection circuit can be the product of effective protection, improve product performance, to avoid a single internal fault protruding signs induced impact on the entire system.
5. Warning strong, visible from up to 500 meters
6. Energy saving, low power consumption, long life, standard double-sided light emitting power is only induced 0.72W, power is only one side of the light emitting guide signs 0.36W (with 12 yellow lights as standard),.
7. Exquisite appearance, the body of plastic material; translucent body with transparent polycarbonate, good transparency; sealants use modified silicone resins
8. Easy to install, safe to use, low failure rate
9. Compression of up to 20 tons.
10. Protection class: IP67.
1. Reasonable Price
2. IP68,Anti-high(low) temperature.
3. Waterproof,Anti-sunburn and Rainproof.
4. Energy Saving and Environmental
Wired Road Stud Details Pictures: